Snuffer Model 9245-DD Direct Drive Air Compressor and Chemical Injector
Two 1.50" OneTouch CAFS Valve Control system with 3 foam presets (WET, DRY & EXTRA-WET)
- Stainless Steel Valves and Stainless Steel Sched 40 Plumbing
- ON/OFF Air Control
- CAFS pressure gauge
One 3.00" Manual CAFS Line
One 250 CFM Rotary Screw Air Compressor (shaft driven from PTO)
- Air/Oil receiver/separator
- Oil Filter
- Oil/water cooler assembly
- Pressure Balance valve
One Chemical Injector - Class A/B Foams
- 0.2 to 3.0%
- 1.0% @ 500 gpm
- 3.0% @ 166 gpm
- A/B selector valve (required if using both Class A and B Foam)
Performance
CAFS output: Two 1.50" (38mm) outlets
One 3.00" (76mm) outlet
Rated capacity: 2500 gpm
Maximum pressure: 150 psi
NOTE: CAFS capacity rated at 9:1 expansion medium foam
General Specifications
Full water flow: Yes
Plumbing: Sched 40 Stainless Steel with Stainless Steel Valves
CAFS outlets: Two 1.50" Outlets
Control type: OneTouch c/w electronic display
Presets: 3
Monitor: One 3.00"
Control type: Manual
Compressor
Type: Rotary screw
Output: 250 cfm @ 125 psi
Operating pressure: 150 psi
Foam Injector
Make: FoamPro 2002
Capacity: 2500 gpm @ 0.2% (500 gpm @ 1.0%)
Maximum pressure: 400 psi @ 2.0 gpm
Application rate: 0.1 to 3.0%
Dimensions
Varies with installation
Support Requirements
- Foam concentrate storage minimum of 75 litre (20 US gallon)
- PTO assembly
- PTO Shaft to Air compressor
- Manual throttle control on truck engine
- Heated enclosure for cold weather operation
Optional Features
- OneTouch Valve control for manual 3.00" line
- Additional OneTouch CAF control
- Akron Brass Valves
- Tank level gauge
|
