Snuffer Model 9145-HD
Hydraulic Drive Air Compressor and Chemical Injector
Two 1.50" OneTouch CAFS Valve Control system with 3 foam presets (WET, DRY & EXTRA-WET)
- Stainless Steel Valves and Stainless Steel Sched 40 Plumbing.
- ON/OFF Air Control
- CAFS pressure gauge
One 150 CFM Rotary Screw Air Compressor with Hydraulic motor
- Air/Oil receiver/separator
- Oil Filter
- Oil/water cooler assembly
- Pressure Balance valve.
- Variable displacement Hydraulic pump shaft driven off PTO
- Base mount with Hydraulic oil tank
One Chemical Injector - Class A foam Only
- 0.1 to 1.0%
- 0.2% @ 850gpm
- 1.0% @ 170 gpm
Performance
CAFS output: Two 1.50" (38mm) outlets
Rated capacity: 2500 gpm
Maximum pressure: 150 psi
NOTE: CAFS capacity rated at 9:1 expansion medium foam
General Specifications
Full water flow: Yes
Plumbing: Sched 40 Stainless Steel with Stainless Steel Valves
CAFS outlets: Two 1.50"
Outlets
Control type: OneTouch c/w electronic display
Presets: 3
Hydraulic Pump
Make: Kawasaki
Type: Variable displacement piston
Hydraulic Motor
Make: Rexroth
Type: Axial piston
Compressor
Type: Rotary screw
Output: 140 cfm @ 125 psi
Operating pressure: 125 psi
Foam Injector
Make: FoamPro 1600
Capacity: 850 gpm @ 0.2% (170 gpm @ 1.0%)
Maximum pressure: 400 psi @ 0.5 gpm
Application rate: 0.1 to 1.0%
Dimensions
Varies with installation
Support Requirements
- Foam concentrate storage minimum of 75 litre (20 US gallon)
- Truck PTO with SAE "C" mount c/w splined shaft/80 HP capacity @ 2,000 rpm
- Hydraulic lines from pump to Snuffer, solenoid valve & to hydraulic tank.
- Manual throttle control on truck engine
- Heated enclosure for cold weather operation.
Optional Features
- Additional OneTouch CAF control
- Class A/B Chemical Injector
- Akron Brass Valves
- Tank level gauge
|
