Snuffer Model 9145-DD Direct Drive Air Compressor and Chemical Injector
Two 1.50" OneTouch CAFS Valve Control system with 3 foam presets (WET, DRY & EXTRA-WET)
- Stainless Steel Valves and Stainless Steel Sched 40 Plumbing
- ON/OFF Air Control
- CAFS pressure gauge
One 140 CFM Rotary Screw Air Compressor (shaft driven from PTO)
- Air/Oil receiver/separator
- Oil Filter
- Oil/water cooler assembly
- Pressure Balance valve
One Chemical Injector - Class A foams only
- 0.1 to 1.0%
- 0.2% @ 850 gpm
- 1.0% @ 170 gpm
Performance
CAFS output: Two 1.50" (38mm) outlets
Rated capacity: 2500 gpm
Maximum pressure: 150 psi
NOTE: CAFS capacity rated at 9:1 expansion medium foam
General Specifications
Full water flow: Yes
Plumbing: Sched 40 Stainless Steel with Stainless Steel Valves
CAFS outlets: Two 1.50" Outlets
Control type: OneTouch c/w electronic display
Presets: 3
Compressor
Type: Rotary screw
Output: 140 cfm @ 125 psi
Operating pressure: 125 psi
Foam Injector
Make: FoamPro 1600
Capacity: 850 gpm @ 0.2% (170 gpm @ 0.1%)
Maximum pressure: 400 psi @ 0.5 gpm
Application rate: 0.1 to 1.0%
Dimensions
Varies with installation
Support Requirements
- Foam concentrate storage minimum of 75 litre (20 US gallon)
- PTO assembly
- PTO Shaft to Air compressor
- Manual throttle control on truck engine
- Heated enclosure for cold weather operation
Optional Features
- Additional OneTouch CAF control
- Class A/B Chemical Injector
- Akron Brass Valves
- Tank level gauge
|
