Snuffer Model 8950
Compressed Air Foam System (CAFS)
Meets U.L.C. Mini-Pumper specification for water flow

Performance
Pump output
	Rated Capacity	250 gpm @ 150 psi
		125 gpm @ 250 psi
	Maximum Pressure	260 psi
CAFS output (out of each outlet)		2 - 1-1/2" (38 mm) outlets
Rated capacity	Medium Foam:	360 gpm at 8:1 expansion ratio
	Dry Foam:	200 gpm at 10:1 expansion ratio
CAFS Combing Valve (CAF lines 1 & 2 combine out of 1 outlet or 1 pre-connect)
	Medium Foam:	720 gpm at 8:1 expansion ratio
	Dry Foam:	400 gpm at 10:1 expansion ratio

General Specifications
Frame Construction		Welded steel
Finish		Powder Coated, Stainless steel front panel
Plumbing		Sched 40 Stainless Steel with Stainless Steel Valves
		Hydrant fill, suction outlet & Tank fill standard
		Pilot Operated Pressure Reducing Valve
Air system		Air outlet with Air/Water separator
		Air cooler circuit
Light system		Front panel light system for nighttime operation
Engine
	Make:	Kubota
	Type:	4 cylinder, Diesel, liquid cooled, Turbocharged
	Output:	42.5 HP @ 2800 rpm
Water pump
	Make:	W.S. Darley 2.5 AGE
	Type:	Gear driven single stage Centrifugal
	Inlet x Outlet:	2.50 x 2.50 npt
Compressor
	Make:	Stellar
	Type:	4 cylinder, water cooled, pressure lubricated (Coolant returns to tank)
	Output:	78 cfm @ foam delivery pressures
	Maximum pressure	125 psi
Foam Injector (2)
	Type:	Water driven hydraulic, Automatic flow compensating
	Capacity:	45 gpm
	Maximum pressure	125 psi
	Application rate:	0.2 - 2.0% (A, B, AB, or ABD Foam)

Support Requirements

› Foam concentrate storage (minimum of 2-20 liter pails)

› Fuel supply and electric fuel pump

› External muffler

Optional Features

› Tank level gauge

› Rail mount skid system with 250 to 500 US gallon (Fiberglass, Plastic and Aluminum tanks available)

› Heated enclosure for cold weather operation

› Plumbing assembly for drafting and/or Tank operation

› Akron Valves