|
The Snuffer 4500 CAFS is a single line foam system delivering 375 gpm of Compressed air Foam at foam delivery pressure. This unit is for retro-fitting existing pumper trucks or any truck capable of supplying 50 gpm @ 120 psi
Performance |
| CAFS output |
|
1 - 1-1/2" (38 mm) outlet |
| |
Rated capacity |
360 gpm @ foam delivery pressure |
General Specifications |
| Frame Construction |
|
Welded Steel |
| Finish |
|
Powder Coated, Stainless Steel Control Panels |
| Plumbing |
|
|
| |
Standard |
1-1/2"(38 mm) Sched 40 SS Plumbing with SS valves |
| |
Optional |
1-1/2" (38 mm) Sched 40 SS Plumbing with Akron valves |
| Air system |
|
Air outlet, and Air cooler circuit |
| Fuel Tank |
|
Engine mounted 6-litre gasoline tank |
| Exhaust |
|
Front discharge mounted muffler |
Engine |
|
|
| |
Make: |
Kohler |
| |
Type: |
2 cylinder, air cooled |
| |
Output: |
16 HP @ 3600 rpm |
Compressor |
|
|
| |
Make: |
Stellar |
| |
Type: |
4 cylinder, water cooled, pressure lubricated |
| |
Output: |
42 cfm @ foam delivery pressures |
| |
Maximum pressure |
120 psi |
| Foam Injector |
|
|
| |
Type: |
Water driven hydraulic, Automatic flow compensating |
| |
Capacity: |
45 gpm |
| |
Maximum pressure |
120 psi |
| |
Application rate: |
0.2-2.0% Standard |
Dimensions |
Depth |
21 in |
(534 mm) |
Width |
33 in |
(839 mm) |
Height |
26 in |
(661 mm) |
Weight (est.) |
300 lbs |
(137 kg) |
Support Requirements |
| › Foam concentrate storage (minimum of 2-20 liter pails) |
| ›1-1/2" (38 mm) Water line from water pump |
| › Remote pressure reducing valve (depending on system pressure) |
Support Requirements |
| › Water / Foam Level gauges |
| › Heater (25, 000 BTU) |
| › Chemical Injector: FoamPro 2002, 2500 gpm @ 0.2% (500 gpm @ 1.0%, 166 gpm @ 3.0%) |
| › Monitor Pre-connect |
|
|
|
|
