|
Snuffer 9165-750 PTO Driven Compressed Air Foam System
Performance |
| Pump Output |
Rated Capacity |
750 US gpm (625 IMP gpm) @ 150 psi |
| |
Maximum Pressure |
260 psi |
| CAFS Output |
Two (2) 1.50" (38mm) |
Medium Foam: 400 gpm / outlet (8:1 expansion ratio) |
| |
One (1) 2.50" (64mm) |
Medium Foam: 400 gpm (8:1 expansion ratio) |
| Water Output |
Two (2) 2.50" (964mm) |
750 US gpm (625 IMP gpm) @ 150 psi |
General Specifications - Standard |
| Frame Construction |
Weld Steel |
| Finish |
Powder Coated, Stainless Steel Control Panels |
| Plumbing |
304 Stainless Steel Sched 40 Plumbing |
| |
Stainless Steel & Akron Brass Valves |
| |
|
| CAFS Outlets |
1.50" (38mm) & 2.50" (64mm) Outlets |
Control Type: |
Snuffer OneTouch™ Valve Control |
Valve Presets: |
3 - Dry, Medium & Wet |
| |
|
| Water Pump |
|
Make: |
Snuffer SC 750 gpm |
Type: |
Gear driven single stage centrifugal |
Inlet x Outlet: |
4.00" (102mm) MF x 3.00" (76mm) MF |
| |
|
| Air Compressor |
|
| Type: |
Rotary Screw |
Output: |
150 SCFM @ 125 psi |
Maximum Pressure: |
125 psi |
| |
|
| Chemical Injector |
|
Make: |
FoamPro 2001 - Class A/B Foam Types |
Capacity: |
1300 gpm @ 0.2% (250 gpm @ 1.0%, 85 gpm @ 3.0%) |
Maximum Pressure: |
400 psi |
Application rate: |
0.1 to 3.0% |
Dimensions |
Depth |
74 inches |
Width |
34, 36, 41 inches |
Height |
55 inches |
Weight (est.) |
2500 lbs |
Support Requirements |
| › Foam concentrate storage minimum of 75 litres (20 US gallon) |
| › 12 V Electrical Supply |
| › Water Supply |
Support Requirements |
| › Water / Foam Level gauges |
| › Heater (25, 000 BTU) |
| › Chemical Injector: FoamPro 2002, 2500 gpm @ 0.2% (500 gpm @ 1.0%, 166 gpm @ 3.0%) |
| › Monitor Pre-connect |
9165-750 Control Panel
|
9165-750 Discharge Panel
|
|
|
|
